Structure made of 19 mm Thick Plyboard covered with sunmica from outside. Work bench of perforated stainless steel. Sides of work bench covered with transparent acrylic sheet. Front acrylic door of collapsible type. Properly balanced blowers fitted on 1/4 H.P. Electric motor provided on the top portion to supply sufficient air to HEPA filter provided on top of work bench horizontally to supply clean air to the work bench vertically. Pre-filters provided on the top to supplu pre filtered air to the blowers. One flourscent tube and one U.V. Germicidal tube provided over work bench. Static pressure manometer fitted on top. Back cover fixed with screws for convenient removal for attending blowers, filters and motor when needed.

Same as laminar Air Flow (Vertical ) but work-bench made of thick ply-board covered with stainless steel sheet. HEPA Filter provided vertically on back of the work bench horizontally. Blowers, motor and pre-filters fitted in lower portion of the cabinet.

Cabinet frame of ply-board covered with sunmica from outside. Work bench top of stainless steel. Side and front door of work bench covered with acrylic. Motor & blower assembly to provide sufficient air pressure. HEPA filter efficiency 99.97% down to 0.3 micron. Pre-filter efficiency 99% down to 5 micron. Cock for gas. Front half opening collapsible acrylic door with gloves arrangement. Virus burnt out unit attachment. 20W flourscent tube light & 15/30W UV Germicidal Tube. Removable covers. With exhaust system.

Fume hood made of stainless steel. 304grade from outside and 316grade inside acid resistant. The work surface is fitted with small wash basin with good quality tap. A gas cock is also fitted for gas supply. A sliding slash made of toughened glass moves vertically up and down with concealed counter balanced weight. Chamber is fitted with 20W fluorescent light. Space underneath the work station is provided with storage compartment. 15/5 Amp socket with switches is provided for light and exhaust system. supplied with cord and plug to work on 220/440volts 1/3 phase 50Hz A.C. Complete with exhaust system and stainless steel Deck & Duct to take out fumes.